Little tricks on how and how you can remove tar from your pants at home
Stains from any kind of resin are among the most problematic stains. It can be very difficult to eliminate them.
To cope with the task, you can use folk recipes or adopt purchased funds.
In this article we will tell you how to remove tar from your pants with improvised means and household chemicals.
Content
Where to begin?
Trousers, even if they are work clothes, should be cleaned of stains, including tar, and washed regularly. It is very easy to stain clothes in wood or epoxy, but getting them off your pants is difficult.
If the stain is fresh and not large in size, then the chances of removing it without a trace are significantly increased. But you need to act quickly... It will be easier to remove the stain immediately, before the composition has set, than after a while.
You can also use any non-sharp object - scraper, spoon, etc. But even if you manage to do this almost immediately, there will still be a noticeable mark on the pants in the place of contact with the resin.
Folk remedies
Many household products can be used to remove tar stains from pants. But they will only help if the drop or sag has already been mechanically removed from the material.
How to clean your trousers with sunflower oil?
Vegetable oil helps to prevent the resin from hardening completely.
On contact with fat, it does not harden quickly and is easier to remove from the material. But after removing it, it will be necessary to remove the greasy oil trail.
If the resin has already impregnated the fibers of the fabric and hardened, the use of sunflower oil will be ineffective.
Ethanol
Pharmaceutical alcohol can be used neat to remove stains. This method works very well for small marks.
Application:
- Moisten the sponge in alcohol.
- Rub the stained area so that the resin is moistened on all sides.You can even leave the sponge on for a few minutes.
- Rub again.
- Wash your pants.
If the pants are dark or printed, rubbing alcohol should be careful to prevent discoloration.
How to clean your pants from resin with alcohol, the video will tell you:
Petrol
Refined gasoline is an effective solventthat will even deal with resin. To do this, use a napkin, which is impregnated with a solvent and applied to the stain for several minutes. Then rub the place of pollution and wash the thing.
How to wipe off with acetone?
For work, you need technical acetone. A nail polish remover containing this substance is also suitable.
After that, the stain rubs again. Completes the treatment - a full wash.
Starch, turpentine and ammonia
If the pants are made of fabric that contains natural wool, then the following stain removal method is suitable:
mix in containers for 1 tsp. ammonia and turpentine;- add a tablespoon of potato starch;
- mix;
- apply the mixture to the stain for a couple of hours, if it is dry - for 12 hours;
- wipe off the composition along with resin residues;
- wash.
Exposure to temperature
Both epoxy and wood resin change their physical properties when exposed to high and low temperatures. Thermal exposure methods are basic, their use gives an even better result in comparison with applications with solvents.
Freezing
The easiest solution to the problem is exposure to cold... This option is one of the simplest and most effective, it is suitable for most types of fabrics. The exception is very delicate materials.
It is convenient to use the freezer for cooling to low temperatures. The pants are folded so that the stain is on top and packed in a bag.
If there is no way to put a thing in the freezer, cooling with ice cubes can be used... But this method is less effective.
Heat
Heating is an alternative way to remove the resin. His choice should take into account the material from which the thing is sewn, since the permissible heating temperature of the iron sole depends on this.
To prevent the stain from passing to the other side of the leg, a piece of board wrapped in a light cloth is placed inside.
You will also need paper towels or an absorbent cloth. Such napkins are applied to the material from both sides, and they begin to iron with an iron.
The higher the temperature, the faster the resin will start to melt... But it must be borne in mind that the heating should not be higher than the permissible for a particular material. This information can be obtained from the product label.
As it heats up, the resin will begin to melt and soak into the paper towels. They will need to be replaced with new ones. After ironing, the pants must be washed, and it will not be superfluous to use a stain remover.
How to remove stains with special compounds?
An alternative to home remedies is household chemicals. Their effect allows you to change the consistency of the resin and contribute to its better removal.
Bleaches
Bleaches, which are designed to whiten things, can only be used with white pants... Otherwise, you may end up with discolored areas on your trousers. The best option is chlorine-free, oxygen-free bleaches.
One of the good options is Antipyatin Oxi-formula with active oxygen. The price is about 70 rubles per package.
Stain removers
Commercial stain removers come in a wide range of products. Different manufacturers have products in different price segments.
One of the well-proven products - Beckmann stain remover... It tackles bitumen, grease and other tough stains.
The stain is moistened with the preparation and left to act. In this case, the composition should not be allowed to dry directly on the spot. After the resin begins to lag, the stained area is cleaned, removing the remaining dirt with a damp cloth.
The price per bottle is about 200 rubles.
Dishwashing detergents
For removing organic resin stains from coniferous and deciduous trees you can use dishwashing gel... It contains components that can dissolve the resinous trail and purify the material. To remove epoxy stains, this method is rarely used due to its low efficiency.
The gel is applied undiluted to the stained area of the pants and left to act for 15-20 minutes. After that, the stain is rubbed, and the thing is re-washed. One popular product that can be used to remove tar is Fairy.
Price - up to 100 rubles for a bottle of 450 ml.
What does the type of resin affect?
It will be very helpful to know what kind of resin the pants were stained with.... If the resin is wood, then it has an organic composition and is easier to remove.
Synthetic, epoxy, removable from fabric is much more difficult. If the type is determined, you can begin to remove the trace using the appropriate substances.
Tips and bans
When removing resin it is recommended to adhere to a number of rules and remember about the prohibitions:
- You should not try to wash the stain with water, as well as soak the thing, as this will only lead to an increase in the affected area due to the growth of the stain.
- Attempts to cut or scratch the stain can damage the material, even causing holes. Mechanical action can only be applied to remove the top "cap" of the resin drop.
- Using strong solvents to remove tar from pants from any fabric can damage the material.
Recommendations
Professional tips and tricks to help deal with stain from the tar on the pants in the most optimal way:
- it is advisable to start cleaning things with rubber gloves;
- you should try to avoid contact of the sticky spot with clean areas of pants and other things;
- an incompletely removed stain will be very difficult to remove over time.
If a large area of the pants has been damaged by the resin, it will no longer be possible to completely clean them.
Find helpful tips and tricks on how to remove tar from clothing. here.
Conclusion
How to remove tar from pants depends largely on the extent of the stain, its age and the material from which the item is sewn. Knowing what simple folk recipes can help clean a thing, you can cope with the problem even at home.
Loading...
