Review of primer enamel for rust 3 in 1 Novbytkhim: advantages and disadvantages, cost, user opinions

foto22018-1Domestic primer-enamel for rust "3 in 1" Novbytkhim occupies a worthy place in the line of modern anti-corrosion and decorative coatings.

The experimentally tested chemical composition, clearly developed instructions for use, many positive characteristics explain the high popularity of the product on the paint and varnish market.

Comparison with analogues, as well as user reviews presented in this article, allow us to assess the feasibility of choosing in favor of a primer enamel for rust "Novbytkhim" 3 in 1.

Features of paint

The manufacturer of the product is JSC "New Household Chemistry", known under the abbreviated name "Novbythim". The firm was founded in St. Petersburg in 1994.

The main direction of the company is the production of household and construction chemicals. The product range includes over 60 items.

This number includes:

  • foto22018-2primers,
  • varnishes,
  • enamels,
  • adhesives,
  • stains,
  • putties,
  • sealants,
  • dyes.

The quality of the supplied products complies with GOST standards, which is confirmed by the Certificate of Conformity received by the company in 2013.

Primer-enamel "3 in 1" Novbytkhim from rust is one of the innovative developments of the St. Petersburg company. The emulsion performs three functions simultaneously:

  1. Blocks the corrosion process.
  2. Priming the surface.
  3. Creates a decorative finish.
Since the primer enamel replaces three agents at the same time, it is possible to shorten the surface treatment time, reduce the labor intensity of the process and at the same time obtain a presentable appearance of the product.

The manufacturer gives the emulsion the following characteristics:

  • weatherproof;
  • quick-drying;
  • waterproof;
  • elastic;
  • heat resistant;
  • economical.

Application area

The multicomponent Novbytkhim primer-enamel is allowed to be used for metal objects indoors or outdoors. They can be either dyed or unpainted. The product is ideal for application on a rusty surface if the corrosion layer does not exceed 100 microns.

foto22018-3The scope of Novbythim is wide enough. It can be painted with:

  • fences,
  • lattices,
  • pipes,
  • factory and warehouse equipment,
  • metal structures of bridges and pipelines,
  • parts and car body.

Do not cover heated indoor surfaces with enamel.If this rule is ignored, a specific unpleasant odor may appear. Items previously painted with nitro enamel (NC) also fall under the taboo. Coated with an anticorrosive primer on top, the nitro paint swells and peels off.

The composition of the product

The primer-enamel formula was developed in our own chemical laboratory Novbythima. The final composition includes several artificial ingredients:

  • synthetic resins;
  • plasticizer;
  • corrosion blockers;
  • useful supplements;
  • solvents.

Solvents of organic origin are used in paint and varnish emulsion. This can be toluene, acetone or xylene. Corrosion inhibitors contain pigments which determine the color of the primer.

The multicomponent composition determines the long shelf life of the packaged primer enamel. It is 36 months from the date of production.

Product line

The range of Novbytkhim paints and varnishes, which combine the "3 in 1" function, includes 11 shades. In addition to the classic white and black colors, the palette includes:

  • Gray,
  • dark grey,
  • brown,
  • brownish red,
  • red,
  • ocher,
  • yellow,
  • dark green,
  • blue.

Colored, black and white primer-enamels give a matte effect after drying.

foto22018-4

In addition to the universal primer-enamel "Novbytkhim" for rust "3 in 1", the manufacturer offers several similar products that differ in composition and application. The catalog includes “3 in 1” latex primer “Chief Technologist”, as well as anti-corrosion enamel for metal “Chief Technologist”.

foto22018-5
foto22018-6

Instructions for use

To obtain a quality result, it is important to adhere to the technology recommended by the developer. Deviating from it may cause problems with coating adhesion and corrosion protection.

The surface treatment algorithm includes several points:

  1. The product is washed from dirt, dust, grease stains.
  2. Rusty deposits are removed mechanically.
  3. Brush off any peeling old paint.
  4. The old paint layer is cleaned to matt.
  5. Degrease the treated surface.
  6. The soil-enamel is diluted to the desired consistency.
  7. Apply Novbytkhim to the prepared area.
  8. The fresh layer is left to dry for one hour.
  9. Apply the primer enamel again.
  10. Stand for two hours to dry completely.
You can paint products with a brush, foam roller or paint spray. In the latter case, the primer-enamel must be made more liquid. This will help create an even thin layer.

For efficient and economical application the consumption rate should be taken into account, it is 80-120 g / m2 with a single-layer coating.

For dilution of Novbytkhim enamel, use a proprietary product based on xylene, Thinner No. 1 or solvents R-4, R-5. These liquids can also be used to clean stained objects, brushes, rollers and other tools.

All work with Novbytkhim primer enamel must be carried out at a temperature not lower than -10 and not higher than +30 degrees.

If the metal was previously painted with NC composition, then the paint is completely cleaned off beforehand... If there is any doubt about the quality of the primer-enamel adhesion, it is recommended to carry out a test before the complete painting of the entire product. To do this, the agent is applied to a small locus, waiting for complete drying and checking the quality of the coating.

If swollen bubbles are observed, it means that the old paint must be removed to zero. If necessary, it is allowed to apply other paint and varnish emulsions over the dried Novbytkhim primer enamel.

It can be:

  • oil,
  • water-dispersive,
  • PF, HV paints and enamels.

Where and at what price to buy?

The enamel primer from Novbythim is sold on the company's official website, in the centers of partner firms, hardware and building stores, online stores. JSC "New Household Chemistry" distributes its products to all regions of Russia and neighboring countries.

foto22018-7Primer-enamel goes on sale in different packaging:

  • cans of 0.4 l.
  • cans 1 l.
  • cans of 3 l.
  • Euro bucket 20 l.
  • barrels 200 l.

As agreed with the customer, Novbytkhim meets the wishes and packs up paints and varnishes in other convenient containers.

The price of the product depends on the volume of the container, the cost of the anti-corrosion agent and the financial policy of the distributors. It is 300-400 rubles for a liter can, and 900-1100 rubles for a three-liter can. For containers of larger volume and for bulk purchase, a reduction factor works. The prices can be viewed here.

Top 3 analogues

Means combining a rust converter, primer and decorative enamel are produced by many foreign and domestic manufacturers.

An alternative to Novbytkhim can be made up of no less effective and high-quality anti-corrosion paints:

  1. Prestige. Russian-made product manufactured by Prestige. The primer enamel is distinguished by a longer final drying period (6 hours) compared to Novbytkhim and a slightly higher consumption (125-180 g / m2). But Prestige wins due to the lower cost: a two-liter can costs about 400 rubles, a five-liter one - 1400 rubles (prices are here).
  2. Dali. The developer and supplier of the priming enamel is LLC NPP Rogneda. Before the start of use, the painted product is dried for 7 hours. The advantages of the product include economical consumption - up to 100 g / m2 and a wide range of colors in the line of smooth and hammer enamels. The disadvantage of Dali is the price: a 2-liter can costs 1200-1400 rubles, a 10-liter can costs 5800-6600 rubles (prices are here).
  3. Lacra. Primer-enamel from the Lakra-Sintez company is characterized by a long drying period (10 hours). However, other indicators coincide with Novbytkhim. So, the consumption is within the limit of 80-120 g / m2, and the price for a 0.8-liter can is on average 400 rubles (prices are here).

Reviews

foto22018-8Different products produced by Novbythim deserve different ratings from users. In general, the products are characterized as high-quality, efficient and meeting the declared indicators.

Primer-enamel "3 in 1" users rate differently, only 45% of them believe that it is worthy of recommendation for purchase and use.

The positive aspects are the price, quality of paint, durability, economy, durability and good paintability of rust even without thorough cleaning. The disadvantages of enamel include a strong pungent odor, which indicates its toxicity.

Consumers who have given negative reviews report a very unpleasant odor, which is felt even when working outside. Poor adhesion to the surface is noticed behind the product, low washability of brushes from paint residues.

All the most important and interesting about primer enamels for rust 3 in 1 can be found in this section.

Conclusion

Primer-enamel Novbytkhim is distinguished by numerous positive features related to ease of use, storage, operation of painted products.

The product is valued:

  • triple action,
  • variety of colors,
  • the possibility of applying over old paint,
  • efficiency and budget.

But before choosing this paint and varnish product, it is recommended to compare it with analogues and read the reviews.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches