Review of primer-enamel for rust 3 in 1 Dali: pros and cons, palette, cost, consumer opinions

When restoring metal surfaces, a double task often arises: to stop corrosion and restore decorativeness. Dali 3 in 1 primer enamel perfectly solves these problems.

The composition developed by the manufacturer provides the desired effect and facilitates the method of using the product. Before choosing the right type of enamel for work, you should pay attention to analogues and reviews.

In this article, we will tell you about the Dali 3 in 1 rust enamel primer, its features, application rules, cost and customer opinions.

Features of paint

This tool is produced by the group of companies "Rogneda"... The profile of the organization is materials for construction and repair. More than 20 years of experience in paint and varnish production allowed the specialists of the scientific and technical center of the Rogneda Group of Companies to develop an effective primer against rust.

The product belongs to the "3 in 1" category, as it combines the properties of a rust converter, a primer and decorative paint. An integral enamel coating prevents oxygen and moisture from reaching the metal surface, thereby providing a preventive effect against corrosion.

Application area

Dali primer enamel is designed to paint over pitting and solid rust that has appeared on metal. The product is suitable for indoor and outdoor use. It does not matter whether the product was previously painted or not.

The paint protects well:

• tree,
• steel (including stainless steel),
• cast iron,
• zinc,
• copper,
• aluminum,
• galvanized metal.

The product is suitable for processing:

• fences,
• gate,
• garages,
• industrial and automotive metal structures,
• equipment,
• pipes.

Indoors, it can be used to paint wooden structures or structures combined with metal.

Composition

The formula of the innovative product includes several components of synthetic origin. The main ingredients are:

1. Alkyd resin.
2. Reducing agent of metal.
3. Corrosion inhibitor
4. Colored pigments.
5. Filler.
6. Anti-corrosion additives.
7. Functional additives.
8. Solvent.

The complex composition provides numerous properties of the primer enamel. The manufacturer guarantees high adhesion to the old paint, as well as the resistance of the fresh coating to:

• moisture,
• ultraviolet,
• oils,
• weak acids and alkalis,
• temperature jumps in the range from -40 to +80 degrees.

Dali ruler

Rogneda Group of Companies produces two types of rust primers: smooth and with hammer effect. The latter can be used even on a rough surface, since it effectively closes small defects.

In order to obtain a pronounced relief of hammer chasing, you should not dilute the enamel too much. To create a large pattern, the primer is applied with a brush, for medium - with a roller, for small - with a spray.

The hammer paint art palette includes 9 shades:

• chocolate;
• brown;
• bronze;
• golden;
• copper;
• the black;
• Gray;
• silver;
• green.

Smooth Dali primer enamel has a wider color spectrum. The palette includes not only traditional colors, but also original colors.

In total, there are 15 shades of smooth paint:

• the black;
• white;
• Ivory;
• Gray;
• silver aluminum;
• green moss;
• green;
• blue;
• ultramarine;
• water blue;
• brown;
• red brown;
• red;
• wine red;
• yellow.

How to use?

When working with a primer enamel of this brand, it is necessary to adhere to certain conditions.

The algorithm for using Dali differs little from the standard scheme for using "3 in 1" ground enamels from rust.

Processing begins with surface preparation and ends with drying:

1. The product is washed from dirt, dust, grease, fuel oil.
2. Mechanically removes thick rust build-ups.
3. Degrease the area with acetone, white spirit or gasoline.
4. The first coat of primer enamel is applied.
5. The coating is dried from 5 minutes to 3 hours.
6. Check the coating for tack and apply a second coat.
7. The final drying of the product is carried out for 7 hours.

Before use, the contents of the jar are stirred and, if necessary, slightly diluted with a universal solvent of the same brand. If not, then solvent, xylene or thinner P646 / 647 is used as an alternative. The maximum proportion of the selected chemical is 10% of the emulsion volume.

Dali may be used over old paintwork as long as it does not flake off under the influence of the enamel. Compliance is checked on a small area with old paint..

When painting, it is important to control the distribution of the enamel. There should be no smudges, drops, clots on the surface. One liter of Dali enamel is designed for 12-18 sq. meters with a single coat.

To apply a thin but dense layer of enamel, use a brush, paint roller or spray gun. The painted surface must be dried exclusively in natural conditions at a temperature of about 20 degrees.

Where and at what price to buy?

Dali's smooth and hammer enamel primer can be ordered on the manufacturer's official website, online stores, and building supermarkets.

Small jar with hammer enamel on:

• 0.23 liters has a price tag of 280 rubles;
• 0.75 l - 570 rubles;
• two-liter capacity - 1400 rubles;
• 10-liter - 6,600 rubles.

Average cost of a can with a glossy primer-enamel on:

• 0.23 l - 230 rubles;
• 0.75 l - 490 rubles;
• 2-liter - 1200 rubles;
• large 10-liter capacity - 5800 rubles.

All prices can be viewed here.

Analogs

The range of anti-corrosion agents that combine the functions of a primer and paint are not only represented by the Dali brand. In the catalog of paints and varnishes, there are worthy analogues, which are not inferior in efficiency to Rogneda's products:

1. Prestige. The Russian product is produced by a holding company of the same name. Primer-enamel Prestige is characterized by a slightly higher consumption than Dali: 125-180 g / m2.

   At the same time, the final drying period differs slightly, it is 6 hours. The price of Prestige enamel is more democratic: you can buy a five-liter can for 1400 rubles.

2. Novbytkhim. The product is supplied to the market by the Novybytkhim firm from St. Petersburg. The consumption of decorative primer is moderate, but slightly higher than Dali: 80-120 g / m2. Processing of products with Novbytkhim can be carried out at temperatures up to -10 degrees. The cost of a 3-liter can is about 1100 rubles, a liter - 300 rubles. All prices are here.
3. Novax. The brand coincides with the name of the manufacturer of paints and varnishes. Distinctive features of the enamel are long final drying (24 hours), as well as reduced consumption of the product (1 liter per 8-12 square meters). Financial expenses for Novax are less than for Dali: a 3-liter can costs an average of 1160 rubles.

Reviews

Positive comments on Rogneda Group products prevail over negative reviews... Overall, 77% of users recommend Dali brand paints and varnishes for use. The advantages are the ease of obtaining the required consistency by diluting with the indicated solvents, problem-free drying, and excellent spreadability.

Other reviews confirm the ease of application, the presentable appearance of the painted surface, and the exact match to the hammer effect. However, there is a strong odor that is characteristic of all paints and varnishes.

All the most important and interesting about primer enamels for rust 3 in 1 can be found in this section.

Useful video

Video review of primer-enamel for rust 3 in 1 Dali:

Conclusion

Dali 3-in-1 primer-enamel fully meets its declared functions, coping with the transformation of rust, priming and painting.

So that the expected result does not disappoint, it is necessary to carefully choose the type and color of paint, strictly follow the instructions... In this case, you can objectively assess the properties of the Dali primer emulsion and form your own opinion about its effectiveness.