Correcting flaws in repairs, or how to remove paint drips from glass

Staining is a commonly used way to change decor. In the process of using paints, other objects, including glass, can get dirty.

It is possible to clean them if you know how to properly clean the stains. In this article we will tell you how and how you can remove paint from the glass than to remove the old and dried from the window.

How to remove?

There are several ways to deal with paint stains on window glass.

For fresh splashes and stains, wiping will help:

• damp cloth;
• the use of a window cleaner;
• with a cloth soaked in soapy water.

Mechanical methods

The mechanical method of removing paint is the easiest way to solve the problem with stained steles.

In order to carry out cleaning, you will need the following items:

• soap solution;
• napkin or sponge;
• razor blade or utility knife;
• rags.

The order of work:

1. The glass is moistened with water or soapy water.
2. Scrape off the stains with a razor or utility knife, keeping the point at an angle of 40-45º.

   Care should be taken to maintain the angle of inclination of the blade, as otherwise the glass could be scratched.

3. The paint particles removed from the surface should be removed with a rag.
4. Final cleaning of the window.

As you move over the window pane, the blade should be cleaned. The surface is periodically moistened to prevent scratches. If the blade is dull, it should be replaced.

Advantages of the mechanical method:

• low financial cost;
• simplicity;
• no negative impact on the environment;
• you can use the method to remove stains of any age;
• the method is suitable for allergy sufferers.

Disadvantages of the technique:

• slow process of removing stains;
• low efficiency - not suitable for large areas;
• there is a chance of scratching the glass.

This type of glass cleaning is time-tested and suitable for all types of paints.

How to remove old stains with chemicals?

If there are a lot of drops of paint on the glass, then it will be difficult to cope with them with a blade. Solvents will come to the rescue.

Acrylic, oil and enamel can be removed using the following chemicals:

• petrol;
• white alcohol;
• acetone;
• special solvents.

Advantages of using chemical solvents:

• efficiency;
• the ability to handle a large area;
• the availability of drugs.

Cons of using such tools:

• toxicity;
• the need to use personal protective equipment (gloves, respirator);
• uneconomical consumption when processing a large area;
• not in all cases high efficiency is achieved;
• high cost of professional solvents;
• the method is not suitable for use by allergy sufferers.

The use of acetone, gasoline and white spirit

Work order:

1. Soak a tissue in solvent. For small spots, it is more convenient to use a sponge.
2. Apply a napkin to the stain.
3. Soak for about 10 minutes. For convenience, you can fix the napkin on the glass with tape.
4. Wipe off the softened paint with a rag.
5. Wipe the surface with a damp cloth.
6. Wash the window.

Areas not removed with solvent can then be removed mechanically.

Special solvents

Special solvents can be used to remove paint from the glass surface. These are effective tools that have a fairly large consumption.

What area each of them is designed for is indicated on the packaging... Based on this, it is possible to select the required volume.

The presented products are suitable for removing all types of paint, including varnish, from concrete, glass, wood and other surfaces.

Thermal methods

In the case when a large glass surface has suffered from the paint, it is appropriate to apply heat to remove all blots and stains. This method requires great care so that the frame and other painted surfaces are not damaged by the hot air.

To work you will need the following items:

• hairdryer;
• foil;
• soap solution;
• sponge;
• rags;
• water;
• ammonia.

Procedure:

1. Prepare a hair dryer.
2. Plug the appliance into a power outlet with hot air supply.
3. Apply foil to the stained place.
4. To warm up the paint, direct a stream of hot air onto the foil.
5. Moisten a sponge with soapy water.
6. When the paint starts to melt, remove it with a sponge.
7. Dissolve the ammonia in half with water.
8. With the resulting solution, wipe the affected area with a rag.
9. Treat the entire glass surface contaminated with paint in the same way.

Instead of a household or building hair dryer, you can use an iron.

Advantages of using the thermal method:

• efficiency;
• the possibility of using on a large area, and with multi-layered spots;
• there is no need to buy special equipment - an ordinary iron or hair dryer is enough.

Cons of the cleaning method:

• labor intensity of the process;
• accuracy and safety precautions are required;
• tough stains may require re-treatment or mechanical rework.

How to choose the best way to clean the window?

The choice of method is determined by:

• the vastness of the affected surface;
• how old are the blots and streaks.

For fresh stains, just a damp cloth will help solve the problem. And you will have to tinker with old staining marks using the above methods.

For small stains, a mechanical method is suitable to eliminate surface splashes.... In case of significant contamination of glass with paint, chemical and thermal methods are suitable. Exposure to high temperatures can also be used for stubborn multi-layer stains.

When exposed to chemical reagents, it is necessary to strictly observe safety precautions and do not allow solvents to get on the frame and window sill. When working with windows, the use of solvents in a spray is undesirable, since it is difficult to control the coverage area.

It is often necessary to use several methods.by combining them for the best result.

Expert recommendations

When starting to remove paint from the glass surface, it is necessary to consider such points:

1. It is easier to remove a fresh paint layer than an old one.
2. When working with solvents, it is necessary to ensure good ventilation in the room, and use rubber gloves, a respirator, and special glasses for protection.
3. Before using the solvent, you must study the instructions for the preparation, and make sure that it is designed to remove a specific type of paint.
4. In order to reduce the likelihood of paint getting on the glass, it is advisable to protect the window before painting. For example, smearing it with a thick soapy solution. In the future, accidentally caught paint will be easy to wash off.
5. Do not mix several types of solvents on one area.

If it is possible to place the glass horizontally during cleaning, it will be more convenient to work with it.

Useful video

How to remove paint from glass will be shown in the video:

Conclusion

It is possible to remove paint from glass even if a large surface area has suffered and the paint has dried up long ago. Wherein the main thing is to choose the right method of exposure, and observe the technological sequence of actions.