Methods and ways to remove adhesive from glass stickers

Stickers and labels with an adhesive backing tend to be difficult to remove from glass.

Cleaning the surface is often difficult, especially when the coverage is large or the sticker has long and securely adhered to the surface.

How to remove adhesive from a sticker from glass? Not only special purchased products will come to the rescue, but also simple homemade recipes.

How to remove traces from the label?

Removing any dirt from glass has its own characteristics. With all its strength and smoothness, such a surface can be easily damaged by the action of abrasive substances, as well as from the use of sharpened and sharp objects.

To remove stickers you will need such devices:

• napkin;
• sponge;
• plastic scraper;
• water.

Instead of a scraper for small areas, it is possible to use an unnecessary discount or bank card.

Vegetable oil

You can try to remove labels and stickers from glass jars and other hard surfaces using oil. It is applied over the entire area and wait a few minutes until the glue becomes soft. After that, the sticker is removed with a scraper.

Alcohol

Alcohol and alcoholic solutions can be used to remove adhesive tape and adhesive labels from glass surfaces. Alcohol, entering into a chemical reaction with glue, leads to its softening.

Work order:

1. Moisten the sticker with a sponge dipped in an alcohol solution (or in pure alcohol).
2. Rub with a brush or hard sponge.
3. If necessary, wetting with alcohol and rubbing is repeated.
4. The glass is washed with water.
5. Wipe dry.

Vodka or cologne can be used instead of medical alcohol.

How to remove with acetone?

The use of acetone for cleaning is carried out in the same way as using alcohol... A sponge or napkin (if the adhesive surface is large) moisten the sticker and affect the adhesive.

After softening, the remnants of the sticker are cleaned off with a brush or a plastic scraper, and the glass is polished with a napkin.

Vinegar

Vinegar will help to remove small glue stains from the stickers. Using it is simple:

1. It is necessary to moisten the stain using a rag or napkin.
2. Rub the desired area with a brush, cleaning off the softened adhesive mass.
3. Wash glass and dry.

Gasoline (kerosene)

Gasoline is often used as a solvent on the household. Purified liquid is suitable for use.

Procedure:

• moisten a rag with gasoline;
• rub the place with glue;
• leave for the time required for exposure;
• remove the remnants of the adhesive mass;
• degrease the glass with a glass cleaner;
• Rinse;
• wipe dry.

How to wipe with wet wipes?

Using wet wipes can help if there is a small mark from the sticker. The composition with which the napkin is impregnated copes well with glue and other dirt.

But this method is not effective if the stickers cover a significant area, for example, the entire window of a shop window.

If the stained glass is located horizontally, you can not only rub the necessary areas with wet wipes, but also make a compress so that the sticker is well saturated with the composition. The best cleaning option is alcohol wipes.

Detergents

Some labels do not require the use of serious household chemicals and solvents. They easily come off just under running water using a washcloth and detergent. As a rule, this applies to stickers on non-glass and ceramic dishes.

Removing the label (stickers):

• lather the product with a detergent (for example, dishwashing detergent or liquid soap diluted in water);
• let the sticker soak in water and soak;
• rub the area with the remnants of glue with a sponge or brush;
• wash off with water;
• repeat the process if necessary.

If possible, a glass object that needs cleaning (for example, a vase) can be soaked whole in a container with warm soapy water, and only then start to remove the sticker. The glass should be left in water for at least half an hour.

Steam and hot air

The adhesive layer on stickers lends itself well to high temperatures. This method allows you to clean the surface without the use of chemicals and caustic agents. The steam can remove even old marks from old stickers.

You can use a regular household hair dryer to remove the sticker:

1. A jet of heated air is directed onto the glass surface.
2. Due to the heating of the glue, it will begin to soften, and, which has become viscous, the mass can be cleaned off with a plastic scraper, a napkin or simply by pulling the corner.
3. If the sticker does not come off, heating can be continued. For large areas, it is better to heat the sticker not all at once, but in parts, removing it gradually.
4. The area is rinsed with water and wiped dry.

Alternative options:

• using a jet of steam from the spout of only a boiled kettle;
• use of a Karcher steam cleaner (even a small manual apparatus is suitable for small processing areas).

Top 3 special products

The use of special preparations makes it possible to cope even with a difficult task in front of which home recipes proved to be ineffective. The market offers a large list of goods in various volumes and price categories.

Kangaroo scotch remover

The tool will effectively remove adhesive from adhesive tape, stickers and labels. Scotch Remover contains citrus oils. Can be used to clean glass, including automotive glass. Manufacturer - Korea. A 0.24 ml spray bottle costs from 550 rubles.

Application procedure:

1. Shake the balloon.
2. Spray from a distance of 0.2-0.3 m from the surface.
3. Withstand 20 seconds.
4. Wipe the glass with a rag.

Advantages:

• efficiency;
• ease of use;
• natural oils in the composition;
• safety for the surface.

Minuses:

• high price;
• Strong smell;
• leaves behind greasy stains, which must then be removed by other means;
• not always effective the first time with double-sided tape;
• small amount of funds.

Aufkleberentferner by Liqui Moly

The sticker stain remover consists of an effective combination of solvents that removes adhesive residues. Can be used on vertical glass surfaces. The cost of a volume of 0.4 liters is about 700 rubles.

Application:

1. Shake the can.
2. Spray on the desired area from a distance of 0.2-0.3 m.
3. Withstand a short period of time for the reaction to pass.
4. Wipe with a napkin.

Pros:

• well splits the remnants of the adhesive layer;
• suitable for vertical application;
• non-flowing gel-like consistency;
• versatility;
• nice smell;
• can be used for cleaning various surfaces, not just glass.

Minuses:

• price;
• may not help the first time.

Glutoclean

The sticker, tape and sticker remover allows you to work on any hard surface (from glass to plastic and wood). Manufacturer - Germany. The cost of the container is 0.5 liters. - from 600 rubles.

Consisting of:

• 5% non-surfactant;
• 30% aliphatic hydrocarbons, etc.

Application:

1. Saturate rags with remover.
2. Wet unremoved label residues.
3. Leave for a minute.
4. clean starting from the corners.
5. Wipe off residues with a brush.
6. Wash off with plenty of water.
7. Wipe dry.

Advantages:

• efficiency;
• ease of use;
• suitable for all types of labels.

Minuses:

• not always convenient packaging and lid;
• in some cases, re-processing may be necessary;
• high price.

11 recommendations

Remove the adhesive from the sticker from the glass the following tips will help:

1. When cleaning the glass, it must be borne in mind that this material is fragile, and it should not be subjected to intense mechanical stress, as it may crack or break.
2. If, in addition to traces from stickers, there is additional decor on the glass (for example, drawing with paints) that needs to be preserved, you need to act very carefully, carefully choosing the method of exposure, since many solvents can damage the decorations on the glass.
3. In the process of working with solvents, it is necessary to observe precautions - organize ventilation, carry out work with rubber gloves.
4. Not all recipes suitable for cleaning glass can be used on plastic, metal and other surfaces, since some solvents react not only with the adhesive part of the sticker, but also with the surface itself.
5. Some types of solvents, such as gasoline, leave an unpleasant odor, which will then have to be washed off and the room ventilated.
6. When buying a special tool for removing glue from stickers, you should study the instructions for a specific preparation, and clarify the possibility of its use on glass.
7. Before purchasing expensive store products, you can try removing sticker stains with simple and easy home remedies.
8. Even if the sticker is removed incorrectly, it is possible to remove all remaining traces of glue.
9. If there are areas of materials sensitive to the solvent used near the glass surface to be cleaned, it is recommended to protect (cover) them in advance.
10. If the traces of glue did not come off the first time, you can try again, or use another method.
11. With the frequent problem of removing stickers from large areas of glass, it makes sense to buy a special scraper from a store that sells car accessories.

Read about how to remove traces of glue from glass surfaces. here.

Conclusion

Remove the glue remaining from the sticker from the glass not as difficult as it might seem at first. It is possible to use for this both improvised means available in the household, and purchased special preparations.At the same time, it is important to be careful when working with a fragile surface, to act methodically and consistently.