How to properly clean windows with a washing vacuum cleaner: tips and tricks

Leading manufacturers of household appliances for cleaning regularly replenish their product lines with units that make life easier for housewives.

Washing the floor, removing stains from carpets or furniture upholstery, cleaning tiles - this time-consuming process takes a few minutes.

A multifunctional washing vacuum cleaner with a variety of attachments copes with the work of several expensive devices, including window cleaning.

Read about how to clean windows with a washing vacuum cleaner in the article.

What devices will cope with the task?

The main function of washing vacuum cleaners is wet cleaning of premises, but it will not be difficult to wash frames, window sills, glass and even mosquito nets with their help if the unit has the function of “Washing windows”.

The principle of operation of the device is simple:

1. The reservoir is filled with clean water with the addition of detergent.
2. The solution flows through a hose to the nozzle.
3. The sprayer under pressure treats the surface with it.
4. The dirt dissolves, the resulting liquid is absorbed by the vacuum cleaner and sent to a second container.

For convenience, the unit is equipped with a telescopic handle that allows you to clean hard-to-reach places and the outside of the window.

Appliance efficiency for glass surfaces

The benefits of a multifunctional home assistant are obvious:

• replaces many window cleaners;
• delivers only clean water, dirty water is immediately absorbed;
• works effectively on surfaces made of various materials;
• works in horizontal and vertical plane;
• eliminates the risk of mechanical damage to parts of the structure;
• saves time and money for housewives.

The functional technique has its drawbacks:

1. Most models are heavy and bulky due to the bulky water containers.
2. Not all units in the kit have a nozzle for cleaning windows. If the model is compatible with it, you can purchase it.
3. For a quick and high-quality result, you need to develop skills, the first experience may not be very successful.
4. Must be washed and dried after each use.

Studying the manufacturer's instructions, special attachments, a little practice, and any hostess will appreciate the clean windowsills and streak-free glass.

Unit preparation and setup

Manufacturers of washing vacuum cleaners (Thomas, Karcher, Krausen, Bosch, Samsung) agree that the operation of any device should begin with studying the instructions.

Assemble the unit, correctly dose the detergent, select the nozzle only after that.

If the instructions are lost, you can go to the manufacturer's official website, select the page with your model and download it. It is located, as a rule, under the technical characteristics of the unit.

For washing windows it is important to set up the device correctly:

• adjust the length of the telescopic handle to effectively clean all parts of the structure;
• transfer the water supply level to the minimum position - the temperature should not be higher than 30 degrees;
• choose a suitable attachment.

If you do not minimize the water supply level, there will be too much of it, the vacuum cleaner will not have time to cope with it. Without additional rubbing with a dry napkin, you cannot get rid of stains on the glass surface in this case.

Glass washing nozzles

The set of the multifunctional device includes 5 attachments... One of them is a cleaning brush for hard surfaces. In tandem with a special adapter, it allows for high-quality cleaning of glass and profile. The nozzle acts as a grabber, removing excess moisture using a rubberized strip.

The vacuum cleaner with a special attachment replaces the telescopic mop, microfiber cloth and rubber scraper. The surface is washed and dried at the same time. This saves the hostess time and effort.

Instructions for use

After assembly, adding water, washing concentrate and adjustments, you can start working.

The classic version takes place in three stages:

1. Spray the surface with a detergent solution using a spray bottle. Keep track of the amount of foam, there should not be too much of it.
2. Switch on the suction mode, move the nozzle horizontally over the surface from top to bottom. Choose a pace at which the vacuum cleaner manages to absorb water and does not leave streaks on the glass.
3. Drain the reservoir, disassemble the unit and clean the parts.

Cleaning windows with a vacuum cleaner is quick, easy and effective. The manufacturer's concentrate actively dissolves impurities, the liquid that forms is instantly absorbed. This prevents drips on the glass and muddy puddles on the floor.

What can and cannot be used as a cleaning agent?

An important point in window cleaning is the correct choice of detergent. There are several manufacturer restrictions.

Can not use:

• liquids with an aggressive composition (based on alcohol, solvent, acids, alkali);
• powders containing granules that are difficult to dissolve;
• products with increased foaming, it is also not recommended to exceed the dosage.

The composition must include:

• antistatic agents to prevent dust accumulation;
• disinfectants that kill mold and germs;
• softening components to neutralize water hardness.

You will find a lot of important and useful information about fast and effective window cleaning in this section.

Related videos

How to clean windows with a washing vacuum cleaner Arnica Hydra Rain Plus, the video will tell you:

Conclusion

A washing vacuum cleaner is an indispensable assistant to the hostess in the struggle for cleanliness. It is effective even on capricious glass surfaces.For the result to be flawless, it is necessary to acquire skills in working with the unit and do not forget about the manufacturer's recommendations.