What to do if water leaks from the Samsung washing machine?

foto23511-1Samsung washing machines are popular and reliable devices that are often preferred when choosing home appliances. But even they are not insured against breakdowns.

Sometimes a Samsung washing machine can upset a leak. Do not be afraid of this. In some cases, it is quite possible to resolve the issue even independently.

What are the reasons that water flows from the Samsung washing machine, how to find a malfunction and fix it yourself, we will tell in the article.

First steps when a leak is detected

If a leak is detected in the washing machine, act as quickly and clearly as possible. Procedure:

  1. foto23511-2Disconnect the power supply without stepping on the water. It is advisable not only to press the shutdown button on the washing machine, but also to disconnect it from the network. If it is impossible to do this, turn off the electricity supply to the sockets or completely unscrew the plugs on the meter panel.
  2. Shut off the water supply to the washing machine. If you cannot do this, then you will have to turn off the water supply to the entire apartment.
  3. Remove water from the floor.
  4. If any water that has been collected remains in the washing machine, it must be drained. This can be done using the emergency drain function, through the filter, which is located on the front side at the bottom.
  5. Take things out of the washing machine.

When a puddle is found on the floor, personal safety and the safety of the house will depend on the correctness of the actions.

Reasons for malfunction

A sudden leak can occur with a device from any manufacturer, even Samsung. The main reasons for puddles on the floor include:

  • operating errors;
  • use of low quality parts;
  • using an unsuitable detergent;
  • mechanical wear of elements and assemblies;
  • violation of the tightness of the joints.
It is extremely rare that a leak can be the result of a factory defect. In this case, the defect appears almost immediately after starting the washing machine.

The following error codes on the display can indicate water leakage or spontaneous tank draining in Samsung washing machines: LC1, LC, E9, LE1, LE.

On devices that do not have a display, a leakage signal can be the following condition:

  • blinking of mode lamps (all);
  • glow of temperature indicators - the highest and the lowest.

The washing machine does not always give an error code when water flows.

Inspect the hoses

foto23511-3To the washing machine two hoses lead:

  • drain;
  • for a set of water.

Both can be sources of leakage. Therefore, a complete and thorough inspection should be performed:

  1. It is necessary to check the quality of the connections with the communications and with the machine itself, first the water supply hose, then the hose providing the drain.
  2. Inspect the entire surface of the hoses, checking their integrity.

If there is a defect in the hose itself, it is better to replace it. It is undesirable to repair and patch them.

If no leak is found outside the apparatus, proceed to the study of the machine itself... For this, they provide free access from all sides.

Leaking drain filter

If water leaks in the area where the drain filter is located, remove the panel at the bottom of the machine. There is a possibility that it is simply not twisted properly.

This may be the case when, after the next cleaning of the drain filter, it was not tightened to the stop... The solution to the problem is carefully so as not to rip off the threads, but at the same time tighten the filter tightly enough.

The filter must be cleaned regularly, as small objects accidentally caught in the drum can accumulate in it.

Leaked from the powder receptacle

foto23511-4This situation can arise in several cases.... The most common option is blockage.

It is also quite possible to cope with the problem on your own. To do this, take out the cuvette. Clean and rinse it separately, removing layers of unwashed detergent, lime, etc.

It is also advisable to check the state of the powder receptacle. washing machine into which the cuvette is inserted. It should also be cleaned.

The second case, leading to a leak through the powder receptacle, is a very high water pressure in the water supply system. This situation is relatively rare and can occur predominantly in the private sector.

Artificial lowering of water pressure will help to cope with an abnormal situation... You can do this yourself by adjusting the degree of opening of the valve on the water supply hose.

How to cope with the problem, you can watch the video:

Pours from the hatch

If, during washing, water spills out or even leaks slightly from the hatch of the washing machine, you must make sure that the cause of the leak is linen that did not get on the seal, which has broken the tightness of the door. Otherwise, it is most likely the cuff.

The damage to the cuff may be very minor, but during the washing and rinsing process, a lot of water can flow out.

In some cases, the cuff can be repaired with a patchas a temporary option. But it is advisable to change the seal by installing a new part.

If you carry out repairs yourself, you need to purchase a completely identical cuff. You need to be prepared for the fact that in the process of replacing a part, the washing machine will have to be partially disassembled.

Leaks from below

A leak under the typewriter can be a sign that the problem lies in the pipes. If the clamps are simply "loosened", they are tightened... But if the pipes themselves are damaged, they are replaced with new ones.

Tank wall damage

foto23511-5Cracks on the surface of the tank itself can cause leakage.

The reason may lie in the overload of the washing machine, frequent ingress of foreign objects, malfunctions of the heating element, etc.

The solution to the problem is to replace the tank... But it is very difficult to do it yourself, even with experience.

It is best to contact a washing machine repair company for help.

DIY repair

Faced with a leak, it will be necessary to analyze not only the condition of the Samsung washing machine. Start by identifying the source of the spilled water.

This may be a breakdown that is not even related to the device., and the water just flowed under the washing machine.For example, as a result of a breakthrough in the water supply or heating batteries, a leaky toilet tank hose, etc.

Depending on the level of skill in handling equipment, some problems with water leakage can be eliminated independently.

The simplest approach is to check the integrity and quality of the hose connections. Also - check the drain filter.

To eliminate other malfunctions, you will need a partial analysis of the washing... In some cases, for example, if you need to replace the tank, it is difficult to cope on your own, and it is better to contact a washing machine repair company.

Master's call: the price of the issue

foto23511-6If it was not possible to eliminate the leak on your own, it is recommended to contact a company that repairs washing household appliances, including Samsung.

Depending on the complexity of the repair, the cost of the work differs. In the capital and major cities, prices may be higher.

Average in Moscow:

  • repair / replacement of pipes - from 900 rubles;
  • replacement of the hatch cuff - about 1,000 rubles, etc.

In most cases, the repair of the device is carried out by a master on site. But in some cases, for a complete diagnosis, the car may need to be picked up in order to be examined in a workshop.

The price of the parts that require replacement is not included in the price.

If the machine, which is leaking, is still under warranty, contact the service center for help.... You should not try to repair the machine yourself, as there are seals on it.

The buyer of the washing machine receives information about the location of the nearest service point and phone numbers right during the transaction.

If the machine is no longer under warranty, then you should seek help from certified companies that have proven themselves well in the service market. After the completion of the repair, the master issues a guarantee.

It is not advisable to call the master privately, by an accidental announcement, since there is a risk of getting caught by scammers who will lure money out, but either do not perform the work, or do it poorly.

All the most important and useful about repairing Samsung washing machines can be found in this section of the site.

Conclusion

If a Samsung washing machine is leaking, then in most cases, the problem can be solved even on your own... But in some cases, diagnostics and serious repairs are necessary, which only a professional can do.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches