What is the reason for the le error on Samsung washing machine and how to fix it?
The Samsung washing machine has established itself as a reliable assistant in household chores, however, in some situations, household appliances may malfunction, displaying the error message "le" on the display.
This code indicates a problem that needs to be dealt with. You can eliminate the cause of the problem either yourself or by calling the wizard.
Content
What is it and what does it mean?
The Samsung washing machine is equipped with a microcomputer that controls all stages of washing. When unexpected processes occur, a certain character starts flashing on the screen.
The le code means that the problem is with a low water level in the drum. during an automated washing process.
It can be either a leak or self-draining. The sensor is triggered if, within a few minutes, it has recorded a decrease in the water level in the machine's tank four times in a row.
Often, simultaneously with the flashing of the display, a puddle of water is detected on the floor next to the machine. The time at which the defect occurs may vary.
It often occurs:
- a few seconds after starting the wash;
- almost immediately after filling the tank with water;
- during the washing or rinsing process.
Differences in error coding are associated with the design features of Samsung machines and the year of their release. So, washing units manufactured before 2007 are programmed for the e9 designation. More modern models have the letter code le.
If the washing machine is not equipped with a display, then this error can also be easily identified... If there is an unscheduled discharge of water by the program, the unit signals by flashing indicators.
In case of error le, two icons stably glow red: “Bio 60 ° C and“ cold water ”. All indicators of the washing modes flash at the same time.
Why does Samsung give out a code when washing?
Water can flow out of the drum for various reasons. Before proceeding with the solution of the problem that has arisen, it is necessary to establish exactly why it occurred.
Le errors may be based on several objective reasons:
Incorrect connection of the drain hose to the machine or sewer pipe.- Cracked drain tube or broken hose mounting clamp.
- Damage to the seal, which allows an emergency leak of water.
- The drain filter is loose after the last cleaning.
- Clogged compartments of the detergent dispenser in the tray.
- The appearance of defects in the drum or the body of the washing tub itself.
- Failure of the pressure switch (sensor that controls the liquid level).
- Violation of contacts and connections of the water sensor.
- Abrasion or cracks in the sealing lip on the door.
- Malfunction of the electronic control unit of the washing machine.
- Leaks in the water supply (or sewer) pipe to or from the machine.
Some of these causes are not global and can be easily addressed. These include, for example, incorrect installation of the drain hose.
What to do?
Further actions to eliminate the le error depend on the identified cause. You can eliminate many of them with your own hands, without contacting the master.
Each cause has its own remedy:
If the drain hose is the culprit of the problem, correct its connections. The point of entry of the hose into the sewer pipe must be above the tank of the machine. If necessary, the joint is sealed with a new rubber gasket.- Correct the position of the drain hose. He must make an upper loop between the connections to the machine and the sewer (at least 70 cm from the floor).
- If the drain filter is the cause, then it must be tightened more to stop the flow of water through it.
- If water spills out of the dispensing tray, rinse thoroughly. The outlet channels of all tray compartments clogged with petrified powder should be cleaned.
- If there is a leak at the joints of the pipes that go from the tray to the tank or from the tank to the pump, they are tightened more. This procedure can be done independently only if you have the skill of working with equipment.
- If the culprit of the error is the water level sensor, then it is necessary to correct its connections and contacts. This manipulation is also available only with experience with electronics and electrics.
Master call
When independent attempts to fix the le error have not led to success, you need to contact a washing machine repair specialist for help. He will carry out a full diagnosis and offer the most optimal solution to the problem.
You can find a professional in workshops specializing in household appliances... Such offices are available in all major settlements. You can also order a wizard call through online ads or advertising posters.
It is best to seek help from officially operating workshops. They not only have all the necessary permits for work, but also issue a warranty card. Calling a private ad master runs the risk of being a victim of a scam.
The total cost of repairing a Samsung typewriter due to a le error depends on many factors... First of all, this includes the volume and complexity of the work, as well as the cost of components:
replacing a damaged drain hose on a washing machine is estimated at an average of 1400 rubles;- adjustment of the sensor connection by replacing a frayed loop or twisting wires - from 1800 rubles;
- removing a failed one and installing a new water sensor or replacing a microcircuit - from 2,400 rubles;
- repair or replacement of the sealing rubber cuff of the door on a typewriter - from 1900 rubles.
How to prevent the problem from occurring?
To protect your washing machine from the appearance of the le error, it is enough to follow the rules for servicing household appliances and notice any problems that have arisen in time.
This is necessary already at the stage of installing a new device in the house. These measures include the competent connection and installation of the drain hose, control check of the water supply and sewer pipes.
It is also important to respect the dosage of the detergent.... An excess of powder, as well as the use of a product not intended for automated washing, can lead to increased foam formation and problems in the operation of the unit.
Advice
Despite the fact that the Samsung washing machine performs work in an automated mode, after starting the program, it must be periodically monitored.
Since the problem, coded by the le cipher, is associated with the release of water from the tank, unauthorized drainage is often the cause of flooding.
If the automatic water intake and drain is repeated several times, the volume of liquid increases. around the car. This process can only be stopped manually by pressing the corresponding button or by unplugging the power cord.
The second recommendation concerns the quality of the connectors and contacts. After cleaning the filter and other elements, it is important to tighten the parts tightly. When reinstalling the drain hose, check the tightness of the inlet to the sewer pipe.
If the causes of the le error are related to the internal structure of the machine (sensor, tank, contacts, control unit), and the level of competence does not allow you to figure it out on your own, then you should not get down to work. It is better to entrust this responsible business to the master.
You can find out more about error codes of Samsung washing machines here.
Useful video
Why the le error appears on the Samsung washing machine, the video will tell you:
Conclusion
Error le, as well as its counterparts (e9, lc, le1) on the display of a Samsung machine, indicates a decrease in the water level in the tank. The reasons may be:
- problems with contacts,
- failure of a computer program,
- accidental leakage due to mechanical defects.
In any case, they are not a reason to replace household appliances. The problem can be fixed on our own or with the help of a wizard.
Loading...
