How to correctly replace the cross on a Samsung washing machine?

The spider of the washing machine is the part that is responsible for attaching the drum to the tank. It is she who ensures its rotation.

At first glance, it may seem that the part is difficult to replace, but if you understand this issue and strictly follow the instructions, you can cope with the task yourself.

The article will discuss how to properly replace the drum spider on a Samsung washing machine.

How do you know when it's time to change?

Signs that indicate that the part needs to be replaced:

1. The washing machine is making unusual noise. It can be a knocking, grinding or squeaking.
2. Excessive mobility of the appliance during washing, which was not previously observed. The typewriter can move a lot from its original place.
3. The drum does not spin well, after which it may stop completely.

If there is a suspicion that the cross is broken, it needs to be replaced. The part itself is inexpensive, but it is difficult to get to it, since the drum will need to be removed. Repairing the part is also impractical. A new cross will cost less than dismantling, fixing and installing the old one.

The reasons for the breakdown can be very diverse.... Most often, the deformation of the cross is caused by bearing defects. Also, one should not exclude increased water hardness, which complicates the rotation of parts, increases the load on them. As a result, soft metal simply changes its original shape.

The most rare cause is a manufacturing defect. It is possible to establish it in the early stages of device operation. In this case, you should not try to disassemble the machine yourself and replace the crosspiece. You need to contact the store at the place of purchase and report the problem.

Preparation for the procedure

Before proceeding with the basic procedure for replacing the crosspiece, you need to perform preparatory steps:

• turn off the water supply to the washing machine;
• disconnect the device from the mains;
• drain the water that remains in the tank, unscrew the inlet hose and remove the drain filter;
• move the washing machine away from the wall - if possible, it is better to take it out of the bathroom, so it will be faster and easier to do the job.

You will need tools to carry out the repair. Therefore, you need to prepare in advance:

• screwdriver
• bit,
• a hammer.

Step-by-step instruction

Step-by-step instruction to replace the cross:

1. Remove the top cover from the instrument. To do this, unscrew the bolts with which it is attached.
2. Remove the front wall, dismantle the control panel, cuff and UBL.
3. Dismantle the back wall of the washing machine. If the device is belt driven, then remove it.
4. Disconnect the engine and remove the tank, unscrew the bolts that are located around the perimeter. There are 14 of them in Samsung washing machines. If the tank is collapsible, then it is divided into 2 parts. With non-separable tanks, the task is more complicated. Most often, you have to change it completely, or cut it with a hacksaw (only a specialist can handle this task).
5. Assess the condition of the bearings and seals. If they show signs of wear, it is best to replace them too.
6. Unscrew the cross, which is fixed to the outer surface of the tank with two auxiliary bolts or one central bolt. You can knock out the axle with a hammer and chisel.
7. Remove the broken part and replace with a new one. It should fit perfectly into the grooves. To do this, scroll it, find the optimal position. For better fixing, the bolts are lubricated and tightened.
8. Reassemble the washing machine in reverse order, check its functioning.

Video instruction for replacing the cross on a Samsung washing machine:

Where and for what price to buy a new part?

You can buy a new crosspiece at a Samsung service center, or in a specialized store selling components for household appliances. Another option is to order a part online.

The price depends on the point of sale, as well as on the car model for which it was produced. Estimated price - 2000-3000 rubles.

You need to purchase exactly the part that is "native" for the brand and model of the washing machine. It must be original. When making a purchase, you need to demand a check from the seller.

Another option is to buy a used crosspiece... Such parts are often available from home appliances repairmen. However, the seller will not be able to guarantee its proper operation for a long time, therefore it is so important to evaluate its appearance.

The part purchased for disassembly must be free of visible cracks, and have a polished sliding sleeve. If there are dents on it, you should not buy such a cross.

Where to find a master and how much will it cost?

Since it is not always possible to replace the crosspiece on your own, owners of Samsung washing machines often turn to the master. You can find a specialist through an advertisement on the Internet or in a newspaper. Another option is to trust the word of mouth, provided that the acquaintances used the services of repairmen and were satisfied with them.

Replacing the crosspiece is a complex type of repair, so such work is not cheap. The master will require about 3000 rubles, excluding the cost of the part itself.

The procedure is lengthy and can take up to 3 hours. However, conscientious specialists give a guarantee of uninterrupted operation of a new part for up to 2 years.

You need to pay for the work of a specialist only after its completion, when he provides papers that he has provided the service.

In order not to face scammers, you need to pay attention to the following signs:

• the master works alone;
• there are no reviews about him on the Internet;
• he requires payment for calling and diagnostics, although he did not complete the work;
• offers overpriced spider replacement;
• offers to pay for the cost of the part, but does not provide it, referring to the need to order.

If any actions in the work of a specialist are alarming, it is better to refuse cooperation.

All the most useful and interesting about the drum of the Samsung washing machine can be found in this section.

Conclusion

Replacing the cross on a Samsung washing machine is a laborious task. If you make an effort, you can cope with the task on your own. However, without knowledge and skills, there is a risk of ruining the device. In this case, it is better to consult a specialist.