Simple recommendations on how to clean the drain filter in a Samsung washing machine

foto23556-1A drain filter is necessary to protect the pump of the Samsung washing machine from small objects.

Thanks to his presence, hair, threads, handkerchiefs, coins do not clog in it. However, the filter itself can become clogged with any debris.

How to clean the filter in a Samsung washing machine yourself, read the article.

When is cleaning necessary?

foto23556-2The filter should be cleaned as soon as it becomes dirty. Experts recommend performing this procedure as a preventive measure once every 2-3 months.

For devices of the Diamond series, the filter should be cleaned at least 5-6 times a year. The more actively household appliances are used, the more often the procedure should be carried out.

Provided that an animal lives in the house, these dates are shifted. As practice shows, you need to clean the filter after every 10-15 wash cycles.

If you ignore the advice, then one day the filter will clog. The machine will not be able to drain the water in the usual way and will have to carry out this procedure in emergency mode. In this case, an error code will be displayed on the screen. 5E, 5C or E2.

Error E2 is typical for those cars that were released before 2007... The rest of the codes appear on more modern models. Error 5E and E5 should not be confused. The E5 code indicates a malfunction of the water heating system, and not a clogged filter.

Not all Samsung washing machines have a screen. If it is not there, then a lit 40 degree indicator and flashing lights of all operating modes will indicate a clogged filter. If there is no error, but the part is clogged, the water after washing will drain more slowly than usual.

A blockage may be indicated by an unpleasant odor from the washing machine. It becomes especially intense if the device is not used for several days.

Where is the filter element located?

foto23556-3The cleaner is located at the bottom of the Samsung washing machine. For horizontally loaded appliances, it is located on the front wall, at the bottom right side.

The part is covered with a rectangular cover... If the machine was released a long time ago, then the pump can be found under a removable plastic false panel.

On top-loading units, the filter can be found under the panel at the bottom, on one of the sides. However, such models are rare in Russian stores.

Preparation for cleaning

Before proceeding with the main procedure, you need to perform a number of preparatory activities:

  1. Turn off the water tap.
  2. Disconnect the device from the network. This is a prerequisite to avoid electric shock.
  3. Prepare the tools you will need for cleaning.
  4. Using a screwdriver, coin or knife with a rounded end, pry off the hatch cover that covers the part.
  5. Grasping the tab on the filter, turn it counterclockwise by 60 degrees, wait until the water is drained.

This completes the preparation. You can take out the part and start cleaning. The recess into which the filter is screwed is called a snail niche.

Instructions

By following the step-by-step instructions for cleaning the filter, you will be able to quickly cope with the task. Having successfully carried out this procedure once, in the future it will no longer cause difficulties.

What tools are needed?

foto23556-4To carry out the work, the following tools are required:

  • old toothbrush;
  • straight slot screwdriver;
  • pliers;
  • a rag or container for collecting water;
  • Lantern;
  • tweezers or small scissors;
  • citric acid and water.

Cleaning process

The cleaner is unscrewed by rotating movements. You need to turn it counterclockwise. If cleaning is carried out in an emergency mode, it is necessary to spread a rag so that the water does not spread over the floor.

Debris Trap Cleaning Not Always Smooth... When carrying out it, you may be faced with the fact that the part cannot be removed the first time. Most often this happens when it is rarely extracted. Limescale or foreign objects can prevent removal.

To avoid damaging the filter, gently knock on its cover. If that doesn't work, use pliers. In order not to break the ledge, you need to control the pressure. They rotate them neatly, without sudden movements.

Another way to get the filter out of the niche is to dismantle the drain pump. However, this process is more laborious and difficult to cope with on your own.

When the filter is in your hands, it must be rinsed under running water. We recommend using an old toothbrush to remove dirt and debris.... If your hair and threads are very tangled in the mesh, you can use nail scissors and trim them carefully.

foto23556-5When the part is cleaned, there is no need to rush to return it to its place. You should take a flashlight and shine into the hole from which it was removed. Having found the impeller of the drain pump, they remove debris from it, remove the wound hair and threads. You can use tweezers to do this.

When the dirt is removed, put the filter back, twisting it clockwise. Screw it tightly... After completion of work, the lid is closed.

If there is a lot of scale and mold on the filter, it can be removed with citric acid. The part is soaked in a weakly concentrated solution for 2 hours. After this treatment, the mesh is washed with clean water.

Example for washing machine Samsung Diamond

The instruction is always more understandable if it is analyzed with a specific example.... A step-by-step algorithm of actions with an emergency drain is considered for the Samsung Diamond washing machine model:

  1. Open the hatch behind which the cleaner is hidden.
  2. Remove the drain tube from the hook and pull it out.
  3. Remove the plug from the hose and drain the water.
  4. Replace the plug and replace the hose.
  5. Proceed with cleaning the filter according to the instructions given above.

How to check if the machine works after the procedure?

After cleaning is complete, the part must be properly reinstalled. In this case, troubles can be avoided.

To check if everything is in order, you need to plug in the appliance and carry out a test wash without laundry. The absence of smudges indicates the correctness of the procedure.

What problems can you face?

foto23556-6If a puddle of water forms on the floor after cleaning, this indicates the following problems:

  • the part is not fully twisted;
  • when installing it, there was a skew in the threaded connection;
  • the rubber band acting as a gasket has been damaged.

The first two problems can be quickly resolved by reinstalling the filter. If the reason lies in a damaged seal, it must be replaced.

Worst of all, if the threads break when trying to remove the filter. In this case, you will need to replace the pump volute or the filter itself.

All the most important and useful about Samsung washing machines can be found in this section of the site.

Related videos

How to clean the filter in a Samsung washing machine, the video will tell you:

Conclusion

Cleaning the drain filter in a Samsung washing machine is a simple task. You can cope with it on your own in a few minutes.... With regular operation of the device, this procedure is mandatory, as it helps to avoid malfunctions in the operation of equipment.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches