What kind of water should be put into the steam generator and why?

foto4445-1The efficiency of the steam generator largely depends on how correctly it is operated.

The quality of the poured water is one of the important aspects. With a high hardness index, scale formation and a decrease in the service life of the device are possible.

To prevent this from happening, it is necessary to carefully monitor the quality of the water used in the steam generator. What kind of water to pour into the steam generator in preparation for the operation of the device and why, our article will tell.

What kind of pour and is preparation needed?

Water has differences in its chemical composition, which affects the operation of the steam generator and the quality of the steaming itself.

The basis of the device - heating element... Depending on the quality of the water, the service life of the heating element can be increased or decreased.

Since the heating element is the most expensive and difficult part in terms of repair, the quality of water cannot be neglected. In addition, unsuitable water can leave streaks and stains during the steaming process.

Will the tap fit?

foto4445-2Normal tap water, which has not been purified, contains a large amount of impurities.

The alkaline plaque formed during the operation of the device is deposited on the surfaces, destroying them, and disabling the equipment. Weak points - joints, welding spots.

The hardness of tap water, the entry of impurities in different settlements are different. The higher the hardness index, the more danger the household appliance is exposed to., and the faster it will become unusable.

Additional use of water softeners is undesirable. Despite the real decrease in hardness and the absence of scale, these substances are capable of:

  • form unwanted compounds;
  • clog the steam generator;
  • Lead to the formation of brownish-yellow stains on clothing.

If ordinary hard tap water was poured into the steam generator tank, then after the device has been used up, it must be drained and the descaling procedure carried out.

When using tap water, it must be defended, or even better, filtered.

Can I pour distilled?

foto4445-3Distilled water is practically free of impurities and salts.This option is suitable for use in a steam generator, especially in combination with plain water.

The disadvantage of such a product is a decrease in vaporization due to the neutrality of the composition.... The boiling point of such a liquid is higher. It would be better to use it in half with plain water.

In this case, evaporation problems can be avoided. The appliance will run smoothly and there will be no steam explosions or leaks. As a result, the evaporator chamber and the steam generator itself will last longer.

When buying distilled water you should beware of fakes... Purchased in an untrustworthy place, such water may contain heavy hydrogen, a substance that has a detrimental effect on metals, causing damage to equipment.

It is possible to use pure distilled water for the steam generator only if the manufacturer recommends it.

Bottled

Table water, which is sold in supermarkets, has an entry of minerals... When used regularly for filling the steam generator, mineral compounds are deposited and accumulate. In this case, the operating efficiency of the device decreases.

Mineral water should not be used in the steam generator.

Filtered

Filtered water in the steam generator preferable to uncleaned from the tap... The amount of impurities in it is lower. The suitability of water for filling the steam generator is determined by the type of filtration.

The better the water filtration, the better for the device.

Demineralized

foto4445-4This option is one of the most acceptable for use in a steam generator.

This provides:

  • good steam formation;
  • the service life of the device is extended.

Removing salts from the liquid prevents limescale build-up and the generated steam will not leave streaks.

Boiled

Boiled water retains all the mineral impurities that were originally in it. When used in a steam generator, they can damage the appliance by forming scale. This is especially noticeable when boiling hard water.

This water selection option is not very suitable for filling the steam generator tank. Besides the fact that this method takes some time, it does not make the water more suitable for use.

From the well

The use of untreated natural water drawn directly from the well is unacceptable in the steam generator. Such a liquid can contain large amounts of organic and inorganic compounds..

The result of application can be scale, stains on the fabric and a decrease in the service life of the steam generator itself. When using water from this source, it must be carefully filtered.

Thawed

foto4445-5There is a widespread belief about the incredible benefits of melt water for any need.... But it is not suitable for pouring into a steam generator.

Deprived of purification, melt water can contain many undesirable impurities, including organic acids.

When using this option, stains on steamed clothes are possible... The quality of the device itself will also be at risk, since the impurities contained in the water can:

  • form a precipitate;
  • layering;
  • lead to the appearance of limescale.

Special H2O for home appliances: advantages and disadvantages

You can buy water for steam generators and irons in the household appliances department.

It has a number of advantages:

  • specially designed for use in household appliances;
  • properly cleaned;
  • allows you to prevent the formation of stains on things and streaks on surfaces.
This is the best option. The disadvantages are the difficulty with the acquisition in some localities and the high price.

Special flavored water for irons and steam generators is not the best choice. It has a pleasant smell, which is transferred to the processed things.

But in such a liquid there may be the inclusion of minerals and organics. When hot water is heated, such impurities often give out stains and smudges on surfaces.

How much is needed?

Each device has its own instruction manual... It indicates the required volume of water to be filled.

foto4445-6Medium-sized tanks are optimal for home use - up to 1.5 liters. On average, this volume is sufficient to operate for about 30 minutes and heat up in just 5 or 7 minutes.

If there is a lot of work, then the water in the tank will have to be topped up.

Additionally, you should be guided by the following recommendations:

  • do not exceed the amount of water poured into the tank;
  • refill the container as the water evaporates.

Refueling should be done with extreme care, as hot air in the tank is under pressure and may cause burns when opening the lid.

To drain or not to drain the remainder?

After using the steam generator, very often some water remains in its reservoir.

Experts recommend not to leave water for a long time, but to drain it by rinsing the container. If necessary, use the steam generator again; fresh water is poured into it.

It is advisable to leave water in the steam generator for no longer than 2-3 days.

Conclusion

One of the best options for water for a steam generator is to buy a liquid specially designed for this device. Others good options are a mixture of distilled with conventional or demineralized.

The recommendation of the manufacturer of the device should also be taken into account. The use of suitable water means ease of cleaning and care of things, as well as a long service life of the unit itself.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches