Miracle assistant: how to use the Karcher steam generator to clean the house?

Steam generators the famous German brand Karcher in a bright yellow or white case with black inscriptions and accessories are reliable assistants in solving cleaning problems.

The devices are easy to use, do not require special handling skills. Instructions for using the Karcher steam generator are presented in this article.

Preparation for work

Regardless of what exactly needs to be cleaned or washed with a steam generator, to prepare it for work a number of the following actions are required:

1. Unscrew the safety plug and fill the container with water.
2. Screw on the plug and attach the required nozzles to the steam gun. Extension tubes can be used if necessary.
3. Plug the device into a power outlet, two lamps should light up - orange and green.
4. After heating the water to the required temperature, the orange lamp should go out. You can use the device when only the green lamp is on.

To shorten the heating time, it is allowed to fill in warm water.

How to use?

The steam generator with various nozzles allows you to achieve cleanliness in all areas of the apartment and office.

For any type of surface, you must adhere to the rule - on the surface itself should not be:

• dust,
• hair,
• wool,
• garbage.

Before steam treatment, it is better to vacuum the surface or product, sweep it up.

Next, prepare the device for operation, unlock the steam gun and drain the first steam together with the formed water to a safe place (basin). This should be done so that the water that forms in the hose does not wet the carpet or clothing. Next, you should use the right nozzle and steam.

Floor cleaning

Natural stone and tile flooring should be cleaned with a special nozzle with elongated holes.

For cleaning, it is necessary to fasten a napkin folded in 2 times on the nozzle... You need to make movements back and forth, and steam regularly.

To clean the seams, move diagonally to them.For regular cleaning, a single treatment with medium steam is sufficient.

For lacquered parquet and laminate, use two napkinsto create 4 layers and reduce the steam supply to minimum. Treat the surface only once to avoid waterlogging of the top layer.

Cleaning clothes from odors and dirt

Before processing the entire product, it is necessary to check it for color fastness and deformation from exposure to steam. First, treat a small, better inconspicuous area of ​​the garment, let it dry completely and evaluate the result of the steam treatment.

You can do without additional attachments to remove unpleasant odors and straighten wrinkles on clothes, it is necessary to hold the gun at a distance of 5-10 cm. The strength of the steam supply must be regulated depending on the degree of crease and resistance of the fabric.

The steam iron attachment can be used to steam the product without removing it from the hanger, or you can use it on the ironing board.

Carpet processing

Previously, if possible, it is necessary to free the room from furniture. For work you will need:

• hand brush,
• terry cover.

The carpet should be processed directly by touching the surface with the nozzle... Coating areas are sequentially processed from the center to the edge (or from window to door).

The processing time and the steam output can be adjusted according to the degree of soiling. Typically, for a coating that is regularly cleaned, a single cleaning with a medium steam level is sufficient. The steam-treated coating must be left to dry.

Kitchen

In the kitchen, the steam generator will clean the sink, countertops, extractor hood, removes traces of grease and dried food residues:

• glass-ceramic hob,
• tiled walls,
• the outer surfaces of the refrigerator,
• facades of kitchen furniture,
• seams between tiles.

To work, you need a floor nozzle with a napkin, a round brush nozzle and a hand nozzle with a terry cloth cover:

1. The hob and tile joints should be treated with a round nozzle with brass bristles, combining mechanical action with a cleaning jet of steam at a strong pressure.
2. Silicone sealed seams can only be treated with short-term exposure to the steam itself.
3. The walls and facades of furniture, the refrigerator are cleaned with a manual nozzle with a cover, moving from top to bottom along the surface. Do not direct the steam jet at the glued edges of the worktop.
4. Clean stainless steel surfaces from adhered grease with a hand-held nozzle with a cover, wiping intensively and regularly supplying steam. After thorough cleaning, polish the surface with a microfiber cloth.
5. For floors and tiled walls, a floor nozzle with a napkin folded in 2 layers is suitable.

Bathroom

In the bathroom with a steam generator almost all surfaces can be cleaned except for the ceiling, if painted:

1. The walls and bottom of the shower stall, sink, bathtub, mirrors, floor, walls, joints and drainage points, pipe surfaces, including corrugated ones, should be sprayed once with steam from a pistol in a strong feed mode at a distance of 10 cm and remove the loose dirt with a napkin.
2. Strong limescale, which can be in the shower stall, on the walls and faucets, must first be sprinkled with vinegar or a weak solution of citric acid. Leave for a short time and then steam.
3. After processing, wipe the mirror with a paper towel so that the dried drops of water do not leave a trace.

Upholstered furniture

Furniture upholstery is cleaned with a special hand brush with a cover, sequentially processing each section, piece of furniture.

Stubborn dirt must first be cleaned with a non-aggressive agent, depending on the origin of the stain.Apply directly to upholstery or spray from a distance of 10 cm and leave for 15 minutes.

Treat the area of ​​the stain with a nozzle in high steam mode to completely remove the dirt, the rest of the areas can be cleaned with medium steam.

Removing dust from plants

To remove dust from plants, it is necessary to process them once from a steam gun without additional nozzles at a distance of 40-50 cm, the level of steam supply is low. Then wipe with a clean cloth.

Other uses

The functions of the steam generator are not limited to this, he can handle other tasks too:

• Cleaning of the surface of the seats and decorative trim in the car.
• Cleaning of car disks.
• Removing old wallpaper.
• Washable wallpaper cleaning.
• Caring for suede shoes and bags.
• Cleaning and disinfection of soft toys.
• Washing windows, mirrors - at negative outside temperatures, cold glass must first be sprayed with a jet of steam at a distance of 5 cm. by regularly supplying steam at full capacity;
• Processing of sleeping mattresses.

Despite the wide range of possibilities of the steam generator, not all surfaces can be exposed to steam... You cannot process natural leather, plastic, as well as some fabrics:

• gas,
• linen,
• wool,
• velours.

When processing surfaces coated with varnish, wax or paint, as well as simply wooden surfaces, it is necessary to steam the napkin and wipe the products with it.

Precautions for use

When working with the Karcher steam generator the following safety precautions must be observed:

• before each use, it is necessary to check the serviceability of the steam generator and its accessories - the body, the steam supply hose and the power cord must be intact;
• do not open the water tank until it cools down;
• do not turn on the device if there is no water in the tank;
• do not direct a jet of steam at people and animals nearby, due to the high temperature of the released steam, you can get a significant burn even through clothing;
• during operation, hold the device only by the handle or the gun at the end of the hose, do not touch the hose itself with your hands;
• do not remove the nozzles and disconnect the tubes when the steam supply is on;
• do not add detergents, solvents, alcohols to the water tank, you can only use water;
• during operation, do not block the steam lever.

These measures will ensure long and safe operation of the steam generator.

Household appliance care

Care for Karcher steam generators is to prevent the formation of scale in the water tank.

The tank should be descaled on average before every 40 fillings... To do this, it is necessary to dilute the solution with a special agent (you can use citric acid), pour it into the cooled device, leave it overnight. In the morning, pour out the liquid and rinse well 2-3 times with clean water.

You do not need to descale if you use a water softener or distilled water.

The microfiber cloth and terry brush covers can be machine washed at a temperature not exceeding 60 ° C, without adding rinse aid. Extension pipes, hand nozzle and round brush can be rinsed under running water.

Useful video

Video about cleaning with the Karcher steam generator:

Conclusion

The Karcher steam generator is an admirable multifunctional device that will significantly save time and effort when cleaning.

One unit combines the entire arsenal of harvesting equipment: From the floor nozzle to the wrinkle remover. In addition, the device is completely safe for use in a home with small children.

A distinctive feature of Karcher steam generators is the absence of the function of twisting the power wire. This is inconvenient for storage, but company representatives assure that the design change will reduce the durability of the steam generator.