How to quickly and effectively clean a muton fur coat at home?

Mouton, like any other natural fur coat, needs periodic cleaning. Since it is absolutely impossible to wash such a delicate thing, it will be safer to use dry cleaning services.

But in practice, few people resort to such a step, but prefer to clean the fur at home.

It is only recommended to use the most gentle methods so as not to spoil an expensive product. And it is better to pre-test the selected tool in a small area.

If everything is done correctly, then the fur coat will delight its owner with a gorgeous look for more than one year. About, how to clean a fur coat, we will describe below.

Can I use the washing machine?

Can and how to wash a muton fur coat? Washing by hand or in a washing machine is the worst thing you can do relatively mouton coat. In addition, it is risky to get into a fur coat even under rain or sleet.

As a result of prolonged contact with water, the natural fat present on the leather base (flesh) is leveled. And this leads to the loss of elasticity and visual appeal of the fur.

Another important point, thanks to which washing the muton is difficult. When moisture is absorbed, the fur becomes so heavy that it is unrealistic to even lift it with your hands.

And the automatic machine will be even more unable to cope with such a task.... As a result - a spoiled thing and technique.

Wet cleaning instead of washing

When processing the product wet, it is important to avoid getting the flesh (the wrong side of the skin) wet. If this happens, then after drying it coarsens and deforms. Therefore, use a carefully wrung out napkin (gauze, cotton cloth) or a sponge.

For cleaning heavily soiled areas you can use the following tools:

• soap solution;
• ethyl or ammonia (ammonia);
• salt;
• table vinegar;
• glycerol;
• lemon juice;
• hydrogen peroxide.

The last resort is considered the most aggressiveso it's risky to use it for dyed fur.

Soap solution

To prepare a soapy solution, you need water and something foaming (washing powder, shampoo, baby soap, carpet cleaner).

Then a sponge is moistened in the resulting liquid and the fur surface is treated. The remaining foam is removed with a brush dipped in cool water.

If you clean the dyed sheepskin, then the washing powder is selected without a bleaching effect. This does not apply to white fur.

Vinegar and alcohol

A mixture of alcohol and vinegar will help get rid of greasy stains. It is necessary to combine such ingredients in equal proportions:

• 10% ammonia;
• table vinegar;
• water.

Mix thoroughly and soak a cotton swab with a solution or disk. They are passed over the entire surface of the fur coat, paying special attention to the most contaminated areas.

Then wipe the fur with a clean damp cloth, and place the item on a hanger to dry.

Hydrogen peroxide

Hydrogen peroxide effectively removes greasy shine, yellowness and greasy stains. The cleaner recipe is simple.

You need to take 500 ml of water and add:

• 3 tbsp. l. table salt;
• 5-6 ml of hydrogen peroxide.

This option is especially relevant for white and light sheepskin coats.

Ammonia

A dark muton coat can be cleaned with ammonia. It is mixed with cold water, in a 1: 4 ratio.

Then a sponge or a piece of cloth is dipped in the solution and carefully begins to process the fur product.

Even if the fur coat is not very dirty, this recipe is useful for adding freshness and shine.

After the end of the winter season, it is recommended to use this method before storing the fur coat in the closet for summer storage.

Dust cleaning

Fur garments absorb dust well... Therefore, even in the absence of visible dirt, it will be useful to periodically expose the fur coat to light cleaning.

To do this, it is enough to shake the muton well (it is better to do this on the street) or use a vacuum cleaner turned on at the minimum power mode.

In ecologically clean regions you can spread the fur coat on the snow with the pile down and gently beat it with a beater... After that, shake it so that no snow remains on the fur. Otherwise, when it melts indoors, it will harm the pile.

An alternative to this technique is a wet and squeezed sheet, which is covered with a fur coat and easily tapped on top (like a carpet). Hang out to dry on a hanger.

Dry cleaning

For dry cleaning of a muton coat one of the listed means will do:

• wheat bran;
• talc;
• semolina;
• starch;
• fine sand.

They act as follows:

1. The fur coat is laid out on a flat surface.
2. The selected cleaning agent is preheated in a dry hot frying pan.
3. Spread it evenly over the surface.
4. Gently begin to rub into the fur.
5. Leave the product in this state for a while so that dirt and grease are absorbed.
6. Raise the fur coat and shake well several times.

How to clean white fur at home?

Light muton requires a special approach when leaving. Before starting the cleaning procedure, you should get a special fur brush.

First, the product is inspected for the presence of the most greasy places:

• collar,
• cuffs,
• hem,
• pockets.

It is odorless, does not contain harmful impurities and has increased volatility. therefore it quickly disappears without a trace... Sold in any business department.

There is no need to dilute pure gasoline. They put on protective gloves on their hands, moisten the sponge and begin to rub the greasy and yellowed areas on the fur.

Wait a certain time for the pile to dry completely. This is where the procedure ends.

It is recommended to treat a fur coat with gasoline in the fresh air. Smoking is prohibited during work!

You can use hydrogen peroxide (3%) to give your white mutton coat a fresh look. It is diluted in equal proportions with water and a damp cloth is passed along the entire pile. At the same time, they do not strive to wet it too much.

After that, the fur coat is dried naturally and combed. A mixture of hydrogen peroxide and ammonia returns its former shine to a fur coat. It is enough to add a few drops to a bottle of peroxide.

Another equally productive option for cleansing a light sheepskin is combination of soap solution with starch... The spots are covered with starch and sprayed with soapy water from a spray bottle.

Distribute the resulting gruel by hand over the treated area. Wait until the applied product dries up, and then remove it with a vacuum cleaner or brush.

How to dry properly?

Dry a muton fur coat exclusively in an upright position on a hanger. Be sure to fasten with all buttons and available fasteners. The ambient temperature should be room temperature.

After final drying of the fur you need to comb it with a standard plastic or wooden hair brush... Do not touch wet areas, so as not to rip out the backs.

How to wash the lining at home?

If everything is very clear with the cleaning of fur, then it remains to figure out how to operate with the lining.

There are two ways to clear it:

• directly on the product;
• preliminary rebuffs.

Each of the options has certain difficulties. In the first case, there is a great risk of damage to the product as a whole, in the second, it will take a lot of time and effort.

Deciding to update the lining fabric without ripping, prepare a soapy solution and a soft sponge... Next, you need to dissolve a little soap in warm water. Slightly moisten the sponge in the liquid and start processing.

After completion, wipe the cloth again with clean water. Dry with paper napkins. Hair dryers and irons cannot be used.

In the second case The ripped off lining is washed after soaking in soapy water... After washing and drying, the fabric is ironed and sewn back.

Related Videos

Check out the expert's opinion on how to wash natural fur coats:

Conclusion

A sheepskin fur coat is a luxurious thing that you need to learn how to properly care for. Then it will look like new for many years. Cleaning often is not recommended, but after the end of winter they do it without fail.