Useful tips on how to machine wash your holofiber pillow and by hand

Holofiber is one of the popular synthetic fillers that is often used for stuffing pillows.

Like any bedding, a holofiber pillow needs regular washing, which must be done according to all the rules.

In this article we will tell you how to properly wash a pillow from holofiber in the washing machine and by hand.

Preparing for washing

Holofiber is a synthetic filler that is a non-woven material. It consists of elastic spiral fibers that form a large number of air pockets.

The material has many advantages:

• elasticity;
• the possibility of doing laundry at home;
• good heat retention;
• safety;
• elasticity;
• availability;
• hypoallergenic;
• long service life;
• does not absorb moisture and odors.

Recommended number of washes - once a year... With more frequent washing, or carried out in violation of technology, the pillow will deteriorate faster and will require replacement.

Polyester fibers, intertwining with each other, form a springy material, especially suitable for filling fluffy elastic pillows.

In order not to damage the structure of the synthetic filler, it should be washed in compliance with the following rules:

1. Avoid soaking things, especially long-term ones.
2. Only liquid detergent should be selected.

   Dry powders are not only difficult to wash out of the material, but they also lead to the formation of ugly streaks on the case.

3. Do not use bleach containing chlorine, as this can damage the filler fibers.
4. The washing temperature should not be higher than indicated on the label on the product. If it is not, then no more than 30-40 ° C.
5. Special attention should be paid to the thoroughness of rinsing, regardless of the type of wash.

In cases where the pillow cover is heavily soiled, it is allowed to wash (with a liquid detergent diluted in water) the affected areas before washing. If only the cover is dirty and the padding is intact, washing it alone may be sufficient.

The option with interchangeable cuffs is often optimal. to the pillow, allowing them to be washed more often without using the stuffing material.

Can I load into a washing machine?

Whether it is possible to wash a pillow with a synthetic filler, it is desirable to determine by the tag. If there is none, then the suitability of the pillow for washing is determined experimentally:

1. A heavy book is placed in the middle of a horizontal item.
2. After a few minutes, the load is removed.
3. By how quickly the original shape of the thing is restored, a conclusion is made about the possibility of washing.

Machine wash is less preferable than hand wash, since the fluffy filler, evenly distributed throughout the volume of the pillow, when washed in a machine, knocks into uneven lumps.

Intensive rinsing and spinning can render the item completely unusable. In this regard, we recommend a gentle hand wash, if necessary, machine wash on a delicate cycle. If an intensive wash is required for the pillowcase, the holofiber is removed and the cover is washed separately.

Step by step process

Automatic washing machines allow you to wash quickly and easily. You must first make sure that the thing can be subjected to such processing.

Procedure:

• studying the label on the product in order to make sure that the filler is holofiber;
• the product is placed in the washing machine without pre-soaking;
• setting the machine regulator to the “delicate wash” or other mark (“synthetics”, “bulky items”), depending on the type of machine;
• pouring liquid into the container of the washing machine;
• after washing, the garment is gently wrung out by hand and dried in the open air.

In cases where the contamination of the pillow is significant, it the filler can be washed in parts... In this case, each "batch" of holofiber is preliminarily placed in a pillowcase or other cover with a fastener and washed separately.

How to hand wash?

Hand washing requires more effort. But with this option the effect on the padding is controlled, which allows the product to be washed gently... For hand washing holofiber pillows, only a gel detergent is also used.

For very large pillows with significant volume, hand washing is also preferable to tamping the garment into the drum of the washing machine.

The order of work:

• draw in a large container, for example, a bath, warm water;
• dilute a liquid detergent in water;
• immerse the pillow in the water;
• get it completely wet;
• turning, keep it in the bath for 20-30 minutes, turning often. Do not apply intense exposure, which can damage the holofiber and provoke the formation of foam. For light soiling, the effect of a detergent dissolved in water will be quite enough;
• squeeze out gently;
• rinse several times, replacing the water. Or rinse under running water. At the final stage, the water should be clean after rinsing, and there should be no foam;
• then squeeze out and dry again.

Correct drying

After washing, the pillow should be lightly wrung out with a terry towel and placed on the dryer.

In order for the product to dry evenly, without straining into lumps, it should be whipped and turned during the drying process.

Pillow not recommended to be hung or left to dry on a surface without bottom ventilation.

In the first case, the stuffing will be knocked to one side, in the second, drying will be difficult - the holofiber will begin to cake, damp, and the cover will be covered with ugly stains.

It is possible to speed up drying. To do this, you can use a regular household hair dryer. In this case, the product being dried must be constantly whipped, allowing the air currents to reach the entire filling volume.

The best way to dry your garment is to leave it outdoors in the shade.... It is necessary to change the position of the pillow every couple of hours.

Filler recovery

If the pillow has not been properly washed and dried, the filler may shrink unevenly. In order to rectify the situation, it is necessary to try to put the packing in order.

The holofiber "balls" should be removed. A deep pelvis is suitable for this. If the pillow case is not equipped with a zipper, you will have to rip up the fabric along the seam to get the contents.

You can disassemble the filler in one of the following ways:

1. With your hands.
2. Acting with a slicker brush that is used to care for animals.
3. By combining both previous methods.

All three options are laborious, requiring accuracy and a lot of time... Despite the thoroughness of the restoration work, the pillow will not be the same.

The maximum that can be achieved is to give things a look that will allow them to be used for their intended purpose for a little more time.

Conclusion

Using all of the above recommendations, you can wash your holofiber pillow yourself at home.

With a competent approach, the thing will retain its attractive appearance and high performance for a long time. With proper use and proper care, the product can last up to 10 years.